QUARTER WAVES...

• To: chip-at-grendel.objinc-dot-com
• Subject: QUARTER WAVES...
• From: richard.quick-at-slug.st-louis.mo.us (Richard Quick)
• Date: Thu, 8 Dec 1994 00:01:00 GMT
• >Received: from goofus.wustl.edu by csn-dot-net with SMTP id AA08095 (5.65c/IDA-1.4.4 for <chip-at-grendel.objinc-dot-com>); Thu, 8 Dec 1994 05:50:53 -0700

 >>> check the draw with RMS volt and ammeters

 > Does any one know of a good source for ammeters that read in   
 > the tens of amps? I have only seen milliamp meters, except for 
 > the expensive inductively coupled electrician's ammeters.

I put my panel meter together from the surplus catalogs.


Marlin P. Jones & Assoc.
P.O. BOX 12685
Lake Park  FL 33403-0685
Tel: 407-848-8236, Fax: 407-844-8764

C & H Sales Co.
2176 E. COLORADO BLVD
P.O. BOX 5356
PASADENA  CA  91117
Tel: 800-325-9465, Tel: 213-681-4925, Fax: 818-769-4875

Fair Radio Sales, 
P.O. BOX 1105
LIMA  OH 
Tel: 419-223-2196, 419-227-6573, FAX 419-227-1313

I found a panel meter with a 0-60 amp scale, then found a 10:1
current transformer that matched it. It took a couple of catalogs
to find the two matching components, but the total cost was only
about $30.00 and it is very accurate setup.

Richard Quick 

... If all else fails... Throw another megavolt across it!
___ Blue Wave/QWK v2.12

• Prev: Short Notice Video Alert (book, too)
• Next: RE: T.C. DESIGN, AND OTHE
• Index(es):
  • Main
  • Thread