[Prev][Next][Index][Thread]
Re: New ground rods
-
To: tesla-at-grendel.objinc-dot-com
-
Subject: Re: New ground rods
-
From: richard.quick-at-slug-dot-org (Richard Quick)
-
Date: Tue, 19 Sep 1995 18:19:00 GMT
-
>Received: from ns-1.csn-dot-net (root-at-ns-1.csn-dot-net [199.117.27.21]) by uucp-1.csn-dot-net (8.6.12/8.6.12) with SMTP id PAA17397 for <tesla-at-grendel.objinc-dot-com>; Tue, 19 Sep 1995 15:11:41 -0600
* Original msg to: Esondrmn-at-aol-dot-com
Quoting Esondrmn-at-aol-dot-com (Ed Sonderman):
> Yes, I did see Mark Barton's post on inductive ballast. It's
> good to see we were on the right track. Maybe this winter I
> will have time to try making something like this.
Yeah, I am going to have to build one too eventually.
> The best idea I have heard so far for the iron is welding rods.
> They would be precut to length and easy to use. They usually
> are relatively soft, are they the soft iron that we want or are
> they just mild steel?
I am not clear on this one yet. Are we talking arc welding rods?
The arc welding rods I am familiar with are about 18 inches long
and are coated with flux. I think they are mild steel.
Richard Quick
... If all else fails... Throw another megavolt across it!
___ Blue Wave/QWK v2.12