[Prev][Next][Index][Thread]
Magnet Wire...
-
To: tesla-at-grendel.objinc-dot-com
-
Subject: Magnet Wire...
-
From: richard.quick-at-slug-dot-org (Richard Quick)
-
Date: Thu, 22 Feb 1996 19:29:00 GMT
-
>Received: from uustar.starnet-dot-net (root-at-uustar.starnet-dot-net [199.217.253.12]) by uucp-1.csn-dot-net (8.6.12/8.6.12) with SMTP id RAA29088 for <tesla-at-grendel.objinc-dot-com>; Thu, 22 Feb 1996 17:15:51 -0700
Quoting tchand-at-slip-dot-net (Tim Chandler):
> I was looking over the NEMA MW-1000 magnet wire specifications
> document, and I was wondering something.
> What type build is the best to use???
> For example PHELPS DODGE Imideze has 4 different builds:
> (1) Single Build 2850 V (Min. Breakdown Volts)
> (2) Heavy Build 5125 V
> (3) Triple Build 6850 V
> (4) Quadruple Build 7310 V
> (Min. Breakdown voltage is for #22 AWG Copper [MW 16-C])
> I currently have enought of both, Heavy build and Triple build
> Imideze, to wind my 12" coil form, problem is which one to
> use???
If it were me I would use the heavy build. You did not post the
actual thickness of the build, which probably would be more
helpful than breakdown voltage. Excessive insulation thickness
will affect the inductance per unit volume in the construction.
Richard Quick
... If all else fails... Throw another megavolt across it!
___ Blue Wave/QWK v2.12