Re:Humid atmosphere

• To: tesla-at-pupman-dot-com
• Subject: Re:Humid atmosphere
• From: Malcolm Watts <MALCOLM-at-directorate.wnp.ac.nz>
• Date: Wed, 12 Jun 1996 17:40:13 +1200

Hi Bob,


> I did try the experiment that Malcom was suggesting and hung the
> scope probe about 4 feet above the coil to see its output on the 
> scope. The problem was that I could not move the coil far enough
> away from the test area. When I went to adjust knobs on the scope,
> I kept feeling sharp edges from the knob poking me. After a minute
> I discovered that there were no sharp edges on the knobs but that I
> was still within the field of the coil and the grounded set screws
> on the knobs of the scope were nipping my fingers every time I
> grabbed one! I stopped this experiment abrubtly. My scope is fine.

HECK!! I meant with a signal generator, NOT under power! I'm glad 
your scope lived.

Malcolm

• Prev: CP Caps & I'm still alive
• Next: Re: Need Coiling Advice
• Index(es):
  • Main
  • Thread