Re: RSG -at- 60 Hz (sync-gap)

• To: "'Tesla List'" <tesla-at-poodle.pupman-dot-com>
• Subject: Re: RSG -at- 60 Hz (sync-gap)
• From: Tesla List <tesla-at-stic-dot-net>
• Date: Sun, 10 Aug 1997 17:27:36 -0500
• Approved: tesla-at-stic-dot-net

From: 	FutureT-at-aol-dot-com[SMTP:FutureT-at-aol-dot-com]
Sent: 	Sunday, August 10, 1997 10:03 AM
To: 	tesla-at-pupman-dot-com
Subject: 	Re: RSG -at- 60 Hz (sync-gap)

> Pardon me, John while I stick my foot in my mouth. I believe TES asked
> if the rotor should be adjusted on the shaft of the motor. The idea as I
> understand it, is that the entire motor is turned in relation to the
> stationary electrodes so that the phase is advanced or retarded as
> needed.


Rick,

You're right...TES's question was as you indicated above...I read it too
quickly I'm afraid  :(     Thanks for pointing this out.

And of course the phase *can* be adjusted by rotating the rotor 
relative to the shaft...and some folks do this...but this is
inconvenient to do.   Much easier to rotate the whole motor.  It's a
little more work to make up the rotate-able cradle, but well worth the
effort once you start running the coil.
 
John Freau


>snip
>     Rick Holland
  >>

• Prev: Re: good results and sync gapsl
• Next: Re: Best transformers
• Index(es):
  • Main
  • Thread