Solid state Secondary

• To: "'Tesla List'" <tesla-at-pupman-dot-com>
• Subject: Solid state Secondary
• From: Tesla List <tesla-at-stic-dot-net>
• Date: Wed, 31 Dec 1997 02:06:26 -0600
• Approved: tesla-at-stic-dot-net

From: 	RODERICK MAXWELL[SMTP:tank-at-mail.magnolia-dot-net]
Reply To: 	tank-at-mail.magnolia-dot-net
Sent: 	Sunday, December 28, 1997 7:09 PM
To: 	tesla-at-pupman-dot-com
Subject: 	Solid state Secondary

I have finally finished coating my secondary for the solid state coil.
The coating is Bher build 50 super gloss. I used two coats to ensure
corona is suppressed. It is very high gloss, and seems to be very tough. 

  Coilform: a cylindrical ice chest shaped EXACTLY like a Pepsi can!
Made from HDPE.
  Diameter: 12.54" 
  Length: 18"
  Wire Gauge: #21
  H/D: 1.44
  
  The first 2.5"(at the bottom of the coil)is tapered down to 11". I
wonder how this will alter the operation of the secondary?


                                  Frankensteins Helper
                                          Max

• Prev: Re: solid state driver
• Next: Solid State Tesla Coil Safety/Insulation
• Index(es):
  • Main
  • Thread