[Prev][Next][Index][Thread]
Re: plywood capacitor box
From: Roderick Maxwell[SMTP:tank-at-magnolia-dot-net]
Reply To: tank-at-magnolia-dot-net
Sent: Friday, July 11, 1997 9:38 PM
To: Tesla List
Subject: Re: plywood capacitor box
Tesla List wrote:
>
> From: Michael Smith[SMTP:md.smith-at-usa-dot-net]
> Reply To: md.smith-at-usa-dot-net
> Sent: Friday, July 11, 1997 3:07 PM
> To: tesla list
> Subject: plywood capacitor box
>
> greetings all,
>
> Nice to see the list up and working again...The shakes are
> starting to go away now.
>
> I have a quick question. Can anyone recommend a very good and
> relatively inexpensive coating, like a two part epoxy paint or
> something that would be able to seal up the inside of a plywood
> box used to a capacitor case? I would like to avoid building a
> plastic box if I can.
>
> I would like to use several coats of polyurethane, then coat the
> inside with something to hold in the oil.
>
> Anyone have any experience along these lines?
>
> Michael Smith
> md.smith-at-usa-dot-net
Use Evercoat two part epoxy. I bought mine from U.S. Plastics.
Frankensteins Helper
Max