Re: RE Subject: 10KV RMS

To: tesla-at-poodle.pupman-dot-com
Subject: Re: RE Subject: 10KV RMS
From: Tesla List <tesla-at-stic-dot-net>
Date: Sun, 25 May 1997 22:51:04 -0500
Approved: tesla-at-stic-dot-net
Subject:       Re: RE Subject: 10KV RMS
       Date:   Sun, 25 May 1997 13:40:28 -0700
       From:   Skip Greiner <sgreiner-at-wwnet-dot-com>
Organization:  Greiner, Ltd.
         To:   Tesla List <tesla-at-poodle.pupman-dot-com>
 References:   1


Tesla List wrote:
> 
> Subject:      Re: RE Subject: 10KV RMS
>        Date:  Fri, 09 May 1997 11:07:12 GMT
>        From:  robert.michaels-at-online.sme-dot-org (Robert Michaels)
> Organization: Society of Manufacturing Engineers
>          To:  tesla-at-pupman-dot-com
> 
>         Thanks for the come-back.
> 
>         I forgot to ask/confirm -- you are running in air?  That is,
>         your transformers are not immersed in oil?
> 
>                                 - - - - - - -
> 
>         As you continue to keep us posted on your work, would it
>         be possible to also let us know what the total time on
>         the transformers is?
> 
>                                 - - - - - - -
> 
>         It is perplexing that some (such as yourself) get such
>         good performance whereas others have condamned these
>         same transformers.
> 
>                         Lot-to-lot variations in the transformers?
> 
>                         Differing degrees of skill?
> 
>                         The mods you made?
> 
>                                         Puzzled in -- Detroit, USA
> 
>                                         Robert Michaels

Hi Robert and All

Sorry for length of time to answer. Been away.

Transformers are running in air. No coating has been applied to the
outside of the windings after the operation to insulate the hv leads
other than corona dope. I have about 30 minutes on them so far at levels
of a few amps to 30(+) amps input.

I think that one reason I may be having fewer problems with these
transformers and in general with neons is that I run =only= sync-gaps.
Like my = signs.

Skip