[Prev][Next][Index][Thread]
Re: Results of Paper & Poly & Oil
---------- Forwarded message ----------
Date: Tue, 30 Sep 1997 19:57:48 +1000
From: Peter Electric <elekessy-at-macquarie.matra-dot-com.au>
To: Tesla List <tesla-at-pupman-dot-com>
Subject: Re: Results of Paper & Poly & Oil
Tesla List wrote:
> ---------- Forwarded message ----------
> Date: Mon, 29 Sep 1997 14:22:04 -0400
> From: Thomas McGahee <tom_mcgahee-at-sigmais-dot-com>
> To: Tesla List <tesla-at-pupman-dot-com>
> Subject: Re: Results of Paper & Poly & Oil
>
> Please note that the failure mechanism here can take place over an
> extended period of time. I would be interested in knowing if anyone
> else who has disassembled their HV caps has noticed this increased
> tendency to have corona along the "ends" as opposed to the sides.
>
> Hope this helps.
> Fr. Tom McGahee
Fr Tom,
My second cap failed at one end. I had allowed a 1" (not nearly enough I
now realise) border all round the plates and it appears to have tracked
around the poly at the end and then blown a hole through. It had 80 mil
thickness poly and I was running it with 15 Kv. The ends are even more
of a problem when you roll the cap as the poly layers tend to slide
along at the ends, further reducing the overlap.
Cheers,
Peter E.