[Prev][Next][Index][Thread]
Re: Newbie question
---------- Forwarded message ----------
Date: Wed, 15 Oct 1997 09:13:59 +1200
From: Malcolm Watts <MALCOLM-at-directorate.wnp.ac.nz>
To: Tesla List <tesla-at-pupman-dot-com>
Subject: Re: Newbie question
Hi student,
> From: student_of_agoshtas <ceg4760m-at-cs.wright.edu>
> To: tesla-at-pupman-dot-com
> Subject: Newbie question (fwd)
>
>
> Hello all. I'm new to coiling and I have a few basic questions regarding
> coil construction.
>
> 1. What are some good products for coating Tesla secondaries? I've seen
> acrylic-based dielectric sprays out there, but they're 3x the price of
> your run-of-the-mill spray on acrylic from the hardware store. In
> particular, I don't want to use a product that will attack the enamel on
> the wire.
>
> 2. Has anyone built a HV switching supply for a Tesla? I'd like to build
> a 15 kVDC supply using an off the shelf switching controller IC from
> National Semiconductor. The tricky part will be the boost-transformer. I
> thought I'd use a U or toroid core of 77 type ferrite wound with a 1:125
> ratio.
What are the characteristics of 77 ferrite? Can you name a
Philips/Siemens alternative type? I'm unfamiliar with 77. Who is the
manufacturer of this type?
Thanks,
Malcolm