Re: valve diode tubes ? (fwd)

• To: tesla-at-pupman-dot-com
• Subject: Re: valve diode tubes ? (fwd)
• From: Tesla List <mod1-at-pupman-dot-com>
• Date: Thu, 6 Aug 1998 21:54:08 -0600 (MDT)
• Approved: mod1-at-pupman-dot-com

---------- Forwarded message ----------
Date: Thu, 06 Aug 1998 10:45:21 GMT
From: Mike Harrison <wwl-at-netcomuk.co.uk>
To: Tesla List <tesla-at-pupman-dot-com>
Subject: Re: valve diode tubes ? (fwd)

On Wed, 5 Aug 1998 20:52:06 -0600 (MDT), you wrote:

>
>
>---------- Forwarded message ----------
>Date: Wed, 5 Aug 1998 17:10:03 +0100
>From: "chris.swinson" <chris.swinson-at-zetnet.co.uk>
>To: tesla list <tesla-at-pupman-dot-com>
>Subject: valve diode tubes ?
>
>I'm after a diode or valve that will handle 240 watts min, thats at 8Kv -at-30
>ma.  This must be the minimum spec.
>
>Does anyone know of a supplier for them or how much they cost or anything
>really ?
>
>thanks.
>
>
>
>All the beST,
>Chris.
>
>chris.swinson-at-zetnet.co.uk
>
>
>
A few microwave oven diodes in series should do it without much
problem. You probably want to put high-value resistors across each one
to balance out the reverse voltage. Alternatively, a dozen 1N5407's
may be cheaper & easier to get. 
     ____                                                           ____
   _/ L_/  Mike Harrison / White Wing Logic / wwl-at-netcomuk.co.uk  _/ L_/
 _/ W_/  Hardware & Software design / PCB Design / Consultancy  _/ W_/
/_W_/  Industrial / Computer Peripherals / Hazardous Area      /_W_/

• Prev: Any Tesla fanatics in St Louis? (fwd)
• Next: Re: Rotaries and Neons (fwd)
• Index(es):
  • Main
  • Thread