[Prev][Next][Index][Thread]
Re: Solid state cameras (fwd)
---------- Forwarded message ----------
Date: Thu, 6 Aug 1998 11:21:07 -0400 (EDT)
From: Charles Brush <cfbrush-at-interport-dot-net>
To: Tesla List <tesla-at-pupman-dot-com>
Subject: Re: Solid state cameras (fwd)
>---------- Forwarded message ----------
>Date: Wed, 5 Aug 98 11:03:04 EDT
>From: Gary Lau 05-Aug-1998 1044 <lau-at-hdecad.ENET.dec-dot-com>
>To: tesla-at-pupman-dot-com
>Subject: Solid state cameras
>
>I'm contemplating the purchase of a solid state still-image camera, to be
>used largely in documenting the construction and operation of my coil.
>I've seen videos of TC operation that are plagued by snowy interference,
>and I'm wondering if solid state CCD imagers are simply a bad idea
>anywhere near operating coils. Has anyone used one sucessfully with
>near-photographic quality?
>
>Also, do current models permit extended (multi-second "B" mode) exposures?
>
>Gary Lau
>Waltham, MA USA
I got a Sony Hi-8 camcorder last summer specifically for videotaping my
coils and other electrical experiments. I used it to videotape my pole pig
coil last Fall, and despite only being 8-10 feet away from the coil, it
worked fine with no snow. The only time I got snow was when I tried to
videotape my sparkgap and had to position the camera close to the garage
door. Everytime a bolt hit the door I would get snow. Quicktime movies
made from these tapes are on my web site.
That camera was also used for the "cooking with high voltage" section of my
site, in which we simply connected a pole pig to a couple of 100kV caps and
blasted various foodstuffs with it. This kind of thing can create a lot of
very high frequency interference (and really stress test your caps!), but
once again we had no problems with snow.
Charles Brush
http://www.foundrygroup-dot-com/cbrush/fun