metal spinning

To: tesla-at-pupman-dot-com
Subject: metal spinning
From: RODERICK MAXWELL <tank-at-magnolia-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
Date: Sat, 29 Aug 1998 18:25:06 -0600
Approved: terryf-at-verinet-dot-com

I have been posting information, and asking for information on metal
plating. But just yesterday as I was searching for tools to use with a
wood lathe and I stumbled on a site that features metal spinning. It
uses rather small metal disks to line the insides of wooden bowls. I
don't see why the techniques could not be scaled up so you could spin
your own toruses. They sell a kit that includes a instructional video
tape, and the tools for the job. All that would be required is a
suitable wooden form turned on a wood lathe, and larger size metal
sheeting.


   http://www.cuttingedgetools-dot-com/Onlinecat.htm/WebCatalog/MetSpin.html



                             Frankensteins Helper
                                     Max