[Prev][Next][Index][Thread]
Re: What have I found, and can it be used for a Tesla Coil?
Nathaniel,
You have indeed found a variac. You can test it out by plugging in
an incandescent lamp and see if it varies the brightness.
If it does not work, check to see if there is a missing or
blown fuse on the assembly, and replace if necessary.
The variac is excellent for Tesla coil use. You have discovered
that Dumpster Diving is an ancient and honorable art still
practiced by those who are wise.
Your variac is good for about 420 watts.
Congratulations!
Fr. Tom McGahee
----------
> From: Tesla List <tesla-at-pupman-dot-com>
> To: tesla-at-pupman-dot-com
> Subject: What have I found, and can it be used for a Tesla Coil?
> Date: Sunday, August 30, 1998 3:08 PM
>
> Original Poster: bob985-at-earthling-dot-net
>
> I just salvaged two power supplies out of my school's junk heap and am
> wondering if these can be used to power a Tesla Coil.
>
> Here's what they read:
>
> Lab-Volt model 37a Buck Engineering Co.
> and connected to that is Lab-Volt model 49
>
> They both seem to be in working order. (tax payer's money at work here,
> folks... ) :-)
>
> The first one has a dial that controls a voltage from 0-120V ac at 3.5
> amps to a couple of outlets. This is the thing that cought my attention.
> It also has other outputs, but I think, of anything in the system, this
> would be ideal for a Tesla Coil. I've always heard of Variacs, and is this
> one?
>
> Heck, I'd like to take out the 9kV 30ma NST of my current Tesla Coil and
> pop in a 12kV 30ma one, but have been hesitant to because I've always heard
> of people using variacs for more control...
>
>
>
> Thanks for any info.
>
> -Nathaniel
> Who's kinda new to this hobby.
>
>
>
> -----------------------------------------------------
> Get free personalized email at http://yahoo.iname-dot-com
>