[Prev][Next][Index][Thread]
Multi-layered Secondary HELP!!
----------
From: Michael Baumann [SMTP:baumann-at-proton.llumc.edu]
Sent: Sunday, February 15, 1998 1:36 PM
To: Tesla List
Subject: Re: Multi-layered Secondary HELP!!
On Sun, 15 Feb 1998, Tesla List wrote:
>
> ----------
> From: Zuma [SMTP:mwise-at-ns.sosis-dot-com]
> Sent: Sunday, February 15, 1998 1:58 AM
> To: tesla-at-pupman-dot-com
> Subject: Multi-layered Secondary HELP!!
>
> I am considering making a very small portable tesla coil. But before I
> do this I need to clear up how I am going to wind the secondary. First
> of all I am planning on making a secondary coil with these demensions,
> 3.25"o.d. x 9.75"height giving it a 3:1 ratio. I know this sounds way
> too small but hear me out.
Not at all. I have a 3.5x10" coil that produces several 14" arcs from
360VA
Your layered approach is likly to cause you naught but grief,
but good luck trying.
--
Michael Baumann Optivus Technology Inc.|Loma Linda University Medical Center
San Bernardino, California. (909)799-8308 |Internet: baumann-at-llumc.edu