Poor Form? (fwd)

• To: "'Tesla List'" <tesla-at-pupman-dot-com>
• Subject: Poor Form? (fwd)
• From: Tesla List <tesla-at-stic-dot-net>
• Date: Wed, 18 Feb 1998 10:43:48 -0600
• Approved: tesla-at-stic-dot-net

----------
From:  Jim Fosse [SMTP:jim.fosse-at-bjt-dot-net]
Sent:  Wednesday, February 18, 1998 2:15 AM
To:  Tesla List
Subject:  Re: Poor Form? (fwd)

[snips]

>These HDPE drums can not be glued in any manner that I am aware of. 

Chuck,
	Hot glue will glue them together. Not permanently. The joint
can be broken the glue cleaned off and the piece will be untouched.

I build my first secondary out of 2 rubbermaid waste paper can hot
glued open end to open end. It's worked well.

	jim

• Prev: A tragic coil
• Next: BIG Capacitors
• Index(es):
  • Main
  • Thread