[Prev][Next][Index][Thread]
Re: Pig Ballast Question (fwd)
---------- Forwarded message ----------
Date: Sun, 12 Jul 1998 01:13:10 -0600
From: "D.C. Cox" <DR.RESONANCE-at-next-wave-dot-net>
To: Tesla List <tesla-at-pupman-dot-com>
Subject: Re: Pig Ballast Question (fwd)
to: Greg H.
It depends a lot on your actual operating load current and the total series
resistance. I have tried a lot of different variables and 0.3 to 0.5 Ohms
resistance is a good value to use with a pole pig.
DR.RESONANCE-at-next-wave-dot-net
----------
> From: Tesla List <tesla-at-pupman-dot-com>
> To: tesla-at-pupman-dot-com
> Subject: Pig Ballast Question (fwd)
> Date: Saturday, July 11, 1998 10:20 PM
>
>
>
> ---------- Forwarded message ----------
> Date: Fri, 10 Jul 1998 22:17:00 +-100
> From: "Gregory R. Hunter" <ghunter-at-enterprise-dot-net>
> To: 'Tesla List' <tesla-at-pupman-dot-com>
> Subject: Pig Ballast Question
>
> Dear List,
>
> A fellow coiler told me that if I use a purely resistive ballast, I'll
only get about half the rated power out of the pole pig. In other words,
if I use a 5KW space heater as a ballast, the pig will only yield about
2.5KVA output. Any truth to this? Sounds screwy to me.
>
> Greg