[Prev][Next][Index][Thread]
Rectify ac input?
----------
From: Matthew Mills [SMTP:mattmills-at-mindless-dot-com]
Sent: Wednesday, March 04, 1998 2:13 PM
To: Tesla List
Subject: Re: Rectify ac input?
Correct me If I'm wrong but I would expect the best way to make a High Voltager
Rectifier would be to use Microwave Diodes (approx. $3) as these are rated between
6 and 12kV and -at-450mA each and so 12 of them set into a bridge arrangement (3 in
series on each leg) and set in potting tar would make a rather dandy HV rectifier.
Matt
(Just fiddling with sparks and arcs in Hamilton New Zealand)
Tesla List wrote:
> ----------
> From: Edward V. Phillips [SMTP:ed-at-alumni.caltech.edu]
> Sent: Tuesday, March 03, 1998 1:05 PM
> To: tesla-at-pupman-dot-com
> Subject: Re: Rectify ac input?
>
> "I have LOTS of HV rectifiers from monitors but don't know how much current
> they are good for. Jim Lux has hopes of finding the specs for me so maybe they
> will be good for coil work."
>
> Probably not good for more than a couple of milliamps at most.
>
> Ed