[Prev][Next][Index][Thread]

Web page update


----------
From:  Wysock, William C. [SMTP:Wysock-at-courier8.aero-dot-org]
Sent:  Tuesday, March 10, 1998 7:47 AM
To:  Tesla List
Cc:  ttr
Subject:  RE: Web page update


To D.C.,

The primary of the Master Oscillator is made of two single,
parallel connected turns, wound around the circumference
of the outer-most helical layer of secondary turns (this is
the layer that contains 15 turns at a 20 foot diameter, and is
30 inches high.  The primary conductors are 750 MCM
welding cable, as are the inter-connect cables between
the tank capacitor bank and rotary gap.  These are also
double conductors.  The ground connection is to the lower
most secondary coil turn at the outside layer.   The secondary
will be made from fine stranded, PVC insulated #2 AWG cable.
I had not made this clear in that illustration.
Thank you for the question.

Bill Wysock.
 ----------
From: Tesla List
To: Tesla List
Subject: Web page update
Date: Monday, March 09, 1998 9:44PM


 ----------
From:  D.C. Cox [SMTP:DR.RESONANCE-at-next-wave-dot-net]
Sent:  Monday, March 09, 1998 6:56 PM
To:  Tesla List
Subject:  Re: Web page update

to: Bill

Sounds like a neat project.  Are you applying the traditional HV from the
xmfr-cap-RSG between the outermost turn and a tap on a more innermost
turn??  Did you plan on using perhaps 20-60 turns of copper tubing or using
some type of welding cable for your pri-sec driver coil?

DR.RESONANCE-at-next-wave-dot-net



> From:  Wysock, William C. [SMTP:Wysock-at-courier8.aero-dot-org]
> Sent:  Monday, March 09, 1998 10:51 AM

> For many months now, the references to the "13M Story"
> have not had images (figures 1 thru 19) at the end of the
> article, on my web site.    They are posted now.
<snip>
> The outer-most winding of the
> secondary is connected to ground, and the center-most winding
> turn, is the high voltage output of this system, which drives into
> the extra coil.
>
> This system is at present, under preliminary construction.  It
> encompasses the attributes of Tesla's early designs, as well as
> what is [speculated] Tesla accomplished in his final design at
> Wardenclyffe.
<snip>
> Before a full-scale Model 14M is built, I plan to construct a 1/10
> scale model, to prove my hypothisis of design.  I will share the
> results of these investigations here, on the Tesla List.
>
> Bill Wysock.
> ___________________________
> Tesla Technology Research