[Prev][Next][Index][Thread]
small coil ground question
----------
From: D.C. Cox [SMTP:DR.RESONANCE-at-next-wave-dot-net]
Sent: Saturday, March 21, 1998 9:04 PM
To: Tesla List
Subject: Re: small coil ground question
to: Tristan
Our company offers a free "Design for Small Tesla Oscillators Guide" that
will provide you with all the data you require to build a nice small coil.
You can obtain one free by sending me a $3 postage stamps (we usually send
them priority mail) and affix it to a 9 x 11 1/2" size mailing envelope
(SASE). We run a med. size coil with a 48 inch spark on a 120 VAC wall
outlet. As a safety precaution we use a 2 AWG welding cable ground with a
large copper alligator clip on one end to attach to any other possible
nearby ground such as a water faucet, or conduit case, etc. The other end
is attached directly to the base of the secondary coil and is also tied to
the electrical ground. In your control console be sure to use a pair of RF
line filters connected in series with MOV varisters on both inlets and
outlets. Use a smaller pair of series connecte RF line filters on the RSG
if you use this type of gap.
Send your stamped mailer to 10700 N La Reserve #5103, Tucson, AZ 85737 for
fastest service.
DR.RESONANCE-at-next-wave-dot-net
----------
> From: Tesla List <tesla-at-pupman-dot-com>
> To: 'Tesla List' <tesla-at-pupman-dot-com>
> Subject: small coil ground question
> Date: Thursday, March 19, 1998 10:40 PM
>
>
> ----------
> From: Mad Coiler [SMTP:tesla_coiler-at-hotmail-dot-com]
> Sent: Thursday, March 19, 1998 9:30 PM
> To: tesla-at-pupman-dot-com
> Subject: small coil ground question
>
> Coilers,
>
> I am considering for an IEEE project here at college to build a small
> coil that can be demonstrated in the labs or classrooms. I would like
> some advice on wether or not a small coil can use the third terminal
> ground on an outlet for its ground source. By small I am saying probably
> 2 feet long arcs or less. I have done this with my current coil that is
> producing about 2 foot arcs and drawing about 8amps out of 120V outlet,
> nothing seemed affected. I cannot think of any other possible earth
> grounds seeing how pounding a rod into the ground is out of the
> question.
>
> Tristan Stewart
>
> ______________________________________________________
> Get Your Private, Free Email at http://www.hotmail-dot-com
>