[Prev][Next][Index][Thread]
More about my capacitor (fwd)
---------- Forwarded message ----------
Date: Tue, 19 May 1998 09:26:15 +0300
From: Marco Denicolai <marco-at-vistacom.fi>
To: tesla-at-pupman-dot-com
Subject: More about my capacitor
I got right now to know what dielectric was used in the capacitors below:
it was polypropylene and paper, oil was I.P.B.P. Will they work with my
TC (I use two of them in SERIES)?
******************************************************************************
I got some surplus Maxwell capacitors model 30561 0.1uF 25KV with following
specs:
Capacitance: 0.1uF 25KV
Rated peak current: 5 KA
Max peak current: 25 KA
Max ripple freq.: 10 KHz
Max RMS current: 25 A RMS
Max Dissipation factor: 0.3% -at- 120 Hz
Inductance: 80 nH
They are enclosed in metal cans and have got ceramic terminals.
Will they work with my Tesla Coil (frequency about 150 KHz) or will they
warm-up in 10 seconds and blow?
******************************************************************************
________________________________________________________________________
Marco Denicolai Vista Communication Instruments, Inc.
Hardware Development Manager www.vistacom.fi
marco-at-vistacom.fi Kaisaniemenkatu 13 A
fax: +358-9-622-5610 SF-00100 HELSINKI
phone: +358-9-622-623-15 Finland
Remember, Murphy was an optimist! I am not...
________________________________________________________________________