Primary types (fwd)

• To: tesla-at-pupman-dot-com
• Subject: Primary types (fwd)
• From: Tesla List <mod1-at-pupman-dot-com>
• Date: Thu, 21 May 1998 12:23:16 -0600 (MDT)
• Approved: mod1-at-pupman-dot-com

---------- Forwarded message ----------
Date: Fri, 01 May 1998 19:15:31 -0700
From: Michael Tucknott <Michael.Tucknott-at-virgin-dot-net>
To: Tesla List <tesla-at-pupman-dot-com>
Subject: Primary types

Hi all

Can any body on the list give me some advice on building a cone shaped
primary coil.I will be usuing 3/16 copper pipe for the coil and 3/8
copper pipe as a strike rail.I need to know number of turns,space
between turns,space between first turn and the secondary,angle of the
coil and what you guys use as supports etc.... 

Spec---
The secondary is 4.37" by 13.7" with 520 turns of wire.The wire is .64mm
The secondary has a frequency of 267kHz.
The power supply is 10Kv at 50mA.

Cheers Mike(Love that ozone)Tucknott

• Prev: Re: Primary Transformer Question (fwd)
• Next: Re: Simple questions (fwd)
• Index(es):
  • Main
  • Thread