Re: spark gap ?

• To: tesla-at-pupman-dot-com
• Subject: Re: spark gap ?
• From: FutureT-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Date: Thu, 03 Sep 1998 08:16:12 -0600
• Approved: terryf-at-verinet-dot-com

In a message dated 98-09-02 20:47:21 EDT, you write:

<< Hi all,
 
> My first coil used a single gap which was set to about 5mm.  I later changed
> to a multi gap, all gaps are 1mm appart using copper tubes ( RQ type).  This
> improved my coil no end, It must have gave about 50% increase in output.
 
> What I want to know is, if I half the gaps to say, 1/2mm, and use twice as
> much tubes, will this increase power again ?
 
 
> All the beST,
> Chris.
  >>

Chris,

My guess would be that the output spark length won't increase.

John Freau

• Prev: RE: Any Very High Freq. TCs?
• Next: Re: Electroplating
• Index(es):
  • Main
  • Thread