[Prev][Next][Index][Thread]
Re: EMP =- PULSED PHONE DESTRUCTION!
to: Sam
If you fire your EMP generator again as described all the line filters in
heaven won't help. The EMP pulse is being radiated from the wires
connected from the cap to the spark gap (now known as antennas). If you
are referring to a Tesla coil, yes -- line filters help a lot. Use two in
series with varisters between them and also another set of varisters facing
the xmfr pri side. Also use a pair of "hash" chokes (12 AWG on a ferrite
core) in each line lead. This will surpress most all trying to enter the
power line.
DR.RESONANCE-at-next-wave-dot-net
----------
From: Tesla List <tesla-at-pupman-dot-com>
To: tesla-at-pupman-dot-com
Subject: Re: EMP =- PULSED PHONE DESTRUCTION!
Date: Friday, September 11, 1998 5:08 PM
Original Poster: "Sam Barros" <sambarros-at-hotmail-dot-com>
>Original Poster: "D.C. Cox" <DR.RESONANCE-at-next-wave-dot-net>
>
>to: Sam
>
>Your very low inductance of the leads and very low circuit resistance
>caused the sharp EMF. Tesla oscillator pri circuits operate into an
>average load of 40 Ohms and do not see the load of 0.5 Ohms or less as
you
>would in your experiment. As a precaution though, we always shut off
any
>wireless phones or tv sets prior to firing the oscillator.
I cannot afford to do that. Isn’t the use of line filters a better
option?
Sam.
______________________________________________________
Get Your Private, Free Email at http://www.hotmail-dot-com
----------