Re: A question...

To: tesla-at-pupman-dot-com
Subject: Re: A question...
From: "D.C. Cox" <DR.RESONANCE-at-next-wave-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
Date: Sat, 19 Sep 1998 15:51:27 -0600
Approved: terryf-at-verinet-dot-com

to: Patti

Set initial gap at 1/16th inch on each side for testing.  May later expand
to 1/8th inch as necessary.

DR.RESONANCE-at-next-wave-dot-net


----------
> From: Tesla List <tesla-at-pupman-dot-com>
> To: tesla-at-pupman-dot-com
> Subject: A question...
> Date: Friday, September 18, 1998 5:04 PM
> 
> Original Poster: "Patti" <asrai-at-palmnet-dot-net> 
> 
> Hello fellow coilers,
> 
> I am going to fire up my coil this weekend, weather permitting :).  My
> question is, what is the gap distance between stationary and moving
> electrodes on an RSG?  I am currently running a 10KVA distribution
> transformer, and was thinking of .030 to .050 inches.  Is this too narrow
or
> wide?  I will probably be running at 1 or 2KVA initially to look for
smoke
> :).  As soon as it's running I promise to upload pics for all to see.
> 
> Thanks,
> Patti
> ICQ# 10145049
> 
>