Re: MOT Voltage Doubler correction

• To: tesla-at-pupman-dot-com
• Subject: Re: MOT Voltage Doubler correction
• From: Marco Denicolai <marco-at-vistacom.fi> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Date: Mon, 21 Sep 1998 06:25:15 -0600
• Approved: terryf-at-verinet-dot-com

At 12:08 20/09/98 -0600, I wrote:

>that is a pulsed (50/60 Hz) voltage going from 0 to 4kV*2.8 = 11.2 kV.

Sorry, I made a miscalculation. Below is the corrected one:


that is a pulsed (50/60 Hz) voltage going from 0 to 2kV*2.8 = 5.6 kV.



________________________________________________________________________

 Marco Denicolai                   Vista Communication Instruments, Inc.
 Hardware Development Manager      www.vistacom.fi   

 marco-at-vistacom.fi                 Kaisaniemenkatu 13 A
 fax:    +358-9-622-5610           SF-00100 HELSINKI
 phone:  +358-9-622-623-15         Finland

   Remember, Murphy was an optimist! I am not...
________________________________________________________________________

• Prev: Re: DC Supply
• Next: Re: Yet another safety note...
• Index(es):
  • Main
  • Thread