[Prev][Next][Index][Thread]
Re: RG-58 core as high voltage wire? (fwd)
---------- Forwarded message ----------
Date: Thu, 15 Jan 1998 15:21:21 -0700
From: Bill Lemieux <gomez-at-netherworld-dot-com>
To: Tesla List <tesla-at-pupman-dot-com>
Subject: Re: RG-58 core as high voltage wire? (fwd)
Tesla List wrote:
> You can also make a nice HV connector by drilling out the standard "UHF"
> connectors (PL259, SO239 series) and extending the center conductor a few
> inches (in dielectric, of course).
Yes indeed! You can just solder a banana plug on the end, and the
socket can be a piece of plexi into which you've drilled a hole to fit
the length of the dielectric of the coax, with a female banana jack at
the back of the chunk of plastic. A friend of mine made connectors like
this for his home-built CO2 laser power supply (~15kVDC), and they work
beautifully.
> Overall, except that if it is free (can't beat that price...), why not get
> real HV wire, which will have less corona, etc. It's about 0.20/ft for 20
> kV wire
Remember, that's a _DC_ rating. You want 40-50KVDC wire for 15KVAC
NST's, in my experience.
> at the surplus places, even cheaper if you can use 2-3 foot lengths
> (surplus 2nd anode lead from TV's, rated at 40 kV).
Which stuff is a pleasure to use, BTW, as it's usually quite flexible
unless the TV is really old.
-Gomez
--
.......................................................................
. personal email: gomez-at-netherworld-dot-com .
. personal web page: http://www-dot-netherworld-dot-com/~gomez .
.......................................................................