[Prev][Next][Index][Thread]
Temperature to melt NST tar (fwd)
From: D.C. Cox[SMTP:DR.RESONANCE-at-next-wave-dot-net]
Sent: Monday, January 19, 1998 6:36 PM
To: Tesla List
Subject: Re: Temperature to melt NST tar (fwd)
to: Kevin
Best source is T & R Electric, Colman, SD. They carry 12 KV units in
stock.
DR.RESONANCE-at-next-wave-dot-net
----------
> From: Tesla List <tesla-at-pupman-dot-com>
> To: tesla-at-pupman-dot-com
> Subject: Re: Temperature to melt NST tar (fwd)
> Date: Sunday, January 18, 1998 2:20 PM
>
>
>
> ---------- Forwarded message ----------
> Date: Sun, 18 Jan 1998 15:16:31 -0500
> From: Kevin Wahila <wawa-at-spectra-dot-net>
> To: Tesla List <tesla-at-pupman-dot-com>
> Subject: Re: Temperature to melt NST tar (fwd)
>
> >
> >NST are not really designed to do the best job. Pick up a good 12 KV
> >potential xmfr and use a small series reactor on one of the primary
legs.
> >That will provide 160-200 ma continuous and they are nearly
indestructable.
> >
> >DR.RESONANCE-at-next-wave-dot-net
>
> Where would one go about getting a potential transformer from?
>
> Thanks,
> Kevin