[Prev][Next][Index][Thread]
Re: NE555 driven coil WAS:Re: SCR driver coil...
>Date: Fri, 05 Feb 1999 21:37:18 -0700
>To: tesla-at-pupman-dot-com
>Subject: NE555 driven coil WAS:Re: SCR driver coil...
>From: Tesla List <tesla-at-pupman-dot-com>
>
>Original Poster: Paolo <pagaiard-at-geocities-dot-com>
>
>
>
>
>
> "Hi all,
> I have to realize (for an electronics exam) a solid state driven TC
> with a very high efficiency.
> I need to know your opinion on a couple of ideas.
> Suppose I build a ne555 based impulse generator which
> makes 1 us long pulses with a (say) 100-500Khz repetition rate."
The 555 falls apart when you try to use it for fast narrow pulses.
At least the bipolar version does, the newer Cmos variety is faster
but I don't know by how much. Check the spec on this stuff before
you frustrate yourself with parts that are far from the "ideal"
spice fantasy world. For fast rise/fall and simplicity, make an
LC oscillator from a schmidt trigger cmos gate like 4093(?) running
at 12 to 15 volts. (you do the research to discover why this is better).
>
Then I send those pulses into a power transistor (a BJT working a
> current controlled switch, of course)
> via a 2N2222 based current buffer (say a follower emitter).
Not sure what you mean here. ccs=scr ???? How about an IGbjt?
> I could drive directly an inductor tightly coupled to a tesla
>secondary
> winding but with the power available (30W or so) I suppose the yeld
> would be quite low.
>
> But what if I feed a LC circuit with those current pulses?
> The LC must be tuned and coupled to the secondary winding, and
feeding
> it with 1 us pulses, maybe with a repetition rate tuned to the TC
>frequency
> should create into the LC couple powerful oscillations
> and thus make for a high power yeld into the secondary winding.
>
Bet you can't even get spice to make that work! Try it, we can't
do all your homework for you.
-Jim McVey
>
>
>
>
______________________________________________________
Get Your Private, Free Email at http://www.hotmail-dot-com