Winding coils on a CNC lathe

• To: tesla-at-pupman-dot-com
• Subject: Winding coils on a CNC lathe
• From: timp-at-clarityconnect-dot-com (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
• Date: Sat, 13 Nov 1999 11:32:43 -0700
• Approved: twftesla-at-uswest-dot-net
• Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

	Hi all, I'm in the early design stage of my first
coil and the machine shop that I work for just bought a
CNC lathe (10 feet between centers and 18 1/2 inch swing).

	If anyone has tried winding secondary or power 
transformer coils on a CNC I'd appreciate any advice.
Winding the secondary shouldn't present any problems but
winding a rectangular transformer coil is going to present 
some issues with feeding the wire.  

Thanks in advance,
Tim 
  	

• Prev: Re: Cockroft-Walton & Marx Generators
• Next: Re: M.O.T. CURRENT
• Index(es):
  • Main
  • Thread