Re: Coil Winder (fwd)

To: tesla-at-pupman-dot-com
Subject: Re: Coil Winder (fwd)
From: Tesla List <mod1-at-pupman-dot-com>
Date: Tue, 12 Oct 1999 20:30:26 -0600 (MDT)
Approved: mod1-at-pupman-dot-com



---------- Forwarded message ----------
Date: Tue, 12 Oct 1999 07:44:44 -0700
From: "William R. Langston" <blangsto-at-iwvisp-dot-com>
To: Tesla List <tesla-at-pupman-dot-com>
Subject: Re: Coil Winder (fwd)

What is a "fly cutter"?

Tesla List wrote:

> Original Poster: Tesla List <mod1-at-pupman-dot-com>
>
> ---------- Forwarded message ----------
> Date: Mon, 11 Oct 1999 20:50:37 EDT
> From: Parpp807-at-aol-dot-com
> To: tesla-at-pupman-dot-com
> Subject: Re: Coil Winder (fwd)
>
> In a message dated 10/11/99 4:07:21 PM Central Daylight Time,
> tesla-at-pupman-dot-com writes:
>
> << You can also use a small square piece of plywood, with some blocks of 1x3
>  nailed on at the right radius, which is a whole lot easier than trying to
>  cut a nice circle out of plywood (unless you have a good band saw and jig,
>  for which cutting circles is easy). >>
>
> I use a fly cutter to cut beveled washers out of 3/8 - 1/2 inch plywood. The
> centering is almost automatic. After a while you get a collection of washers
> for different size
> forms.
>
> Popping corn in Indiana
> Zeke

--
II*