Re: Conection of the toroid

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Trent Mullins by way of Terry Fritz <twftesla-at-uswest-dot-net>" <neontrent-at-earthlink-dot-net>

Hi Corey,

The method that I like best for connecting the toroid is demonstrated on
Ross Overstreet's page.
It's very similar to what you described, however, you will need baffles
inside the secondary if you plan on running your wire inside.
See Ross's design at:

http://users.better-dot-org/roverstreet/projects/ac_coil/sec.html

Hope that helps,

Trent  Mullins


----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Monday, December 18, 2000 8:43 PM
Subject: Conection of the toroid


| Original poster: "Corey May by way of Terry Fritz <twftesla-at-uswest-dot-net>"
<cbmay-at-home-dot-com>
|
| Hello, I was wondering what the best way is to connect the toroid to the
| secondary, I was thinking a porcilen insulater with a threaded middle
witch I
| can run a bolt through it and the toroid so I can get the sweet spot in
the
| right height buy simply treading the bolt up or down by turning it.
|
| Thanks Corey
|
|
|
|
|