Re: Full Wave Voltage Doubler with MOTs

• To: tesla-at-pupman-dot-com
• Subject: Re: Full Wave Voltage Doubler with MOTs
• From: "Marco Denicolai" <Marco.Denicolai-at-tellabs.fi> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
• Date: Mon, 03 Jan 2000 06:18:34 -0700
• Approved: twftesla-at-uswest-dot-net
• Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

Hi.

I checked your link (tech_corner.htm). My schematics feature 2 doublers.
Basically for one doubler (which corresponds to the link's circuit) you need
just one diode and one cap, if using my schematics.

The Yugoslav circuit uses 2 caps and 6 diodes (!) to achieve the same!

Regards






Tesla List <tesla-at-pupman-dot-com> on 02.01.2000 04:14:20

To:   tesla-at-pupman-dot-com
cc:    (bcc: Marco Denicolai/MARTIS)
Subject:  Full Wave Voltage Doubler with MOTs



Original Poster: "Tero Ranta" <tero.ranta-at-bigfoot-dot-com>

Hi!

Could the following (http://www.kwarc-dot-org/bulletin/99-04/tech_corner.htm)
kind of Full Wave Voltage Doubler circuit be used with MOT's in TC use?

What if you used two MOT's connected out of phase and two full wave
rectifiers?
Would this approach be better compared to
http://www.saunalahti.fi/dncmrc/tank.html ?

Would it matter in TC use?

Regards,

Tero (now totally confused)

• Prev: it is an SRSG (was Wire Guage and Q?)
• Next: Re: Residual Cap Voltage
• Index(es):
  • Main
  • Thread