[Prev][Next][Index][Thread]
Winding a transformer
Hi !
I have found a transformer core made of metal sheets.
Metal sheets are shaped like E and I letters.
It is 1800W and max. inductance in my core is 12000 Gs
I know all the formulas necessary to count number of turns for primary
and secondary and wire diameter. Unfortinatelly i have a problem with
it.
The window in my core is to small ( I mean the space intended for wire
between real core and frame).
My home power system is 220 V and 50 Hz so the primary schould have
about
220 turns (it makes the transformer to take from my power supply about
8 A current and it makes about 1760W). I counted that diameter of wire
schould be about 2,7 mm , but practically 1,7 diameter wire is not
goaing to be hot while working. My problem appears when i want to make
secondary.
There is too little space (of course i remember about isolation and
sufficient wire diameter). I can make about 3 KV transformer , but its
not good to use (not very high voltage , very high current).
This is short description of my problem, and now i want to explain to
You my solution and ask if it is a good idea.
All countings (number of turns) were made for a transformer that will
work properly directly connected to my power supply. In fact to use it
with a tesla coil i schould connect it with a ballast.
That fact made me to think about less turns of primary in my
transformer.
I mean that i can make about 90 turns primary and about 5000 turns
secondary (with isolation). It will not work connected to a power supply
(the fuse will burn), but i thought to connect it with a ballast.
The ballast will keep current at level of about 8 A and my transformer
will give about 12KV and about 150mA.
But this is only theory. How it will work in practice.
Will it work , or loss of power will be high?
Kamil Kompa
czlonek-at-polbox-dot-com
------------------- [POLBOX - REKLAMA] ---------------------
Zagraj mecz z Fibakiem - www.aukcje-online.pl
Platforma - najwiekszy serwis aukcji internetowych w Polsce.
------------------------------------------------------------