new expierament

• To: tesla-at-pupman-dot-com
• Subject: new expierament
• From: "Metlicka Marc" <mystuffs-at-orwell-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
• Date: Tue, 23 May 2000 17:03:48 -0600
• Approved: twftesla-at-uswest-dot-net
• Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

i tried a new experiment last night, i plugged an extension cord into my
120v line,no load on the end. then wraped five turns around an old
secondary i had. connected one end of the coil to the pos. of my fluke
vom, left the neg. lead free spaced. i.e.. laying on the floor. i
clamped the other secondary end lead to a length of cable 12" long, free
spaced this gave me 11v ac out of the secondary at 151 ma.
since after talking to malcolm watts about the two wires producing a non
net field, and after seperating the two lines of the extension cord i
clamped each wire, it showed no current draw whatsoever. i will say here
that the mill i worked at bought me nothing but the best equipment, all
fluke true rms. meters and such.
though this does not seem tc related,  but this shows to me that a coil
can be used in other ways then to just produce ozone.
my next step is to put a diode in line to see if i could charge a
capacitor, useable energy from a waste source.
thank you      marc

• Prev: Re: CD's
• Next: Re: spark gaps
• Index(es):
  • Main
  • Thread