[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: PFC's gooooood...
I'm not an expert on NSTs, but my understanding is that you can draw 15kV
from your NST or 30mA, but not at the same time. When a neon tube strikes it
needs a higher voltage to cause the initial ionisation of the gas (it has a
high resistance) once it has fired it needs a lower voltage to keep working,
the lower resistance of the conducting tube keeps the voltage down. The VA
rating is the continuous rating, not the peak start rating.
----- Original Message -----
From: Tesla list <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Friday, October 06, 2000 11:04 PM
Subject: RE: PFC's gooooood...
> Original poster: "John H. Couture" <couturejh-at-worldnet.att-dot-net>
>
>
> John -
>
> Note that 1.7 amps x 120 volts is 204 watts. The 15/30 NST output is 450
> watts. Output greater than input? Something is wrong.
>
> John Couture
>
>
>
>
>
>
>