Re: MMC PCB

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Terry Fritz" <twftesla-at-qwest-dot-net>

Hi Michael,

You have to leave enough space between strings to prevent flashover if a
string is unused.  Other tips you should check that may apply to this are at:

http://hot-streamer-dot-com/TeslaCoils/MMCInfo/mmcinfo.htm

Cheers,

	Terry


At 10:23 AM 8/10/2001 +0700, you wrote:
>I am laying out a printed circuit board (standard G10-Epoxy) for
>my MMC array.  I realize the traces have to be heavy enough
>for the high pulse currents but short enough to minimize inductance.
>Are there any 'gotchas' going this route such as high voltage
>breakdown of the PCB, etc?  Anyone else build an MMC this
>way?
>
>--Michael
>