Winding Secondary

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "by way of Terry Fritz <twftesla-at-uswest-dot-net>" <Irrelative-at-aol-dot-com>

I finally got some magnetic wire, but I need to create some sort of jig to 
wind my secondary.  I'm planning on having a hand cranking version to 
simplify (a friend will help me).  Does anyone have any tips or easier ideas 
before I get started (I'd really to save time and do it only once)?  I'm 
kinda curious as to how other people have attached a jig to the actual 
secondary form (in my case, PVC pipe) and managed to remove it without 
destroying their secondary.  Currently, I'm planning on attaching a wooden 
pole down the middle by hot-glueing a wood support onto the end and then 
cranking that, and when done, sawing off the ends.  Any tips will be 
appreciated.
                                                Justin