Re: "STRANGE" transformers

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Rick W by way of Terry Fritz <twftesla-at-qwest-dot-net>" <rickwilliams404-at-earthlink-dot-net>

Hey Marc M.,

Do you know if the company did any spot welding? Massive bus taps would
carry the load needed for that. Just a guess....

Rick Williams
Salt Lake City

----- Original Message -----
From: Tesla list <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Sunday, July 08, 2001 11:04 PM
Subject: "STRANGE" transformers


> Original poster: "Metlicka Marc by way of Terry Fritz
<twftesla-at-qwest-dot-net>" <mystuffs-at-orwell-dot-net>
>
> hi all,
> i have two transformers that i'm hoping someone can help me identify?
> i found a couple pallets of these strange transformers at the place i
> picked up a 10kva transformer. pics are at:
> http://www.fortunecity-dot-com/meltingpot/syria/1210/id26.htm
> they're strange to me because at first i thought they were just a
> standard "LARGE" step down transformer, but after i got them home i
> found different.
> the large single one is more like a potential transformer with some
> really high resistance values on the small taps and it has some MASSIVE
> buss taps on the side. it also has the windings incased in a plastic
> foam stuff (looks pretty hv to me?) and it has two oval cores running
> opossed to each other and measuring 2.5" x 1" each. i'll have to current
> limit it to check the output.
> the smaller one has the two individual transformers on each side of the
> single oval core but they are conected together at each tap the same?
> this core measures 3" x 2".
> these are the strangest transformers i've seen in a long time and i hope
> someone can shed some light on what i have here?
> he has about twenty that i could probably get cheap, maybe if anything
> the cores might be nice for some current limiting inductors?
> thanks in advance to any and all that take a look and give sugestions as
> to or what i can do with them.
> marc m.
>
>
>