[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: NST questions

To: tesla-at-pupman-dot-com
Subject: Re: NST questions
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Sat, 14 Jul 2001 12:03:01 -0600
In-Reply-To: <3B5068DA.8A15C3C7-at-sunflower-dot-com>
Resent-Date: Sat, 14 Jul 2001 12:12:16 -0600
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <bAiv8.A.m5B.-tIU7-at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: "Terry Fritz" <twftesla-at-qwest-dot-net>

Hi Robert,

For my filter, the center ground must be connected to the NST case.  "I"
would have the NST case connected to the RF ground.

Cheers,

	Terry

At 10:44 AM 7/14/2001 -0500, you wrote:
>I have a number of questions regarding NST's. OK here goes. how do you
>go about hooking up NST's in parallel? I have seen many drawings but no
>straight forward answers. Also, when you hook a bunch of them in
>parallel, can you use one filter board for all of them or do they each
>need their own protection? Finally, In Terry's NST protection filter, is
>the NST ground the same as the wire connecting to the grounding prong on
>the mains plug or is that the RF ground and not connected to the NST's
>or what? thanks for the help,
>Robert
>

Prev by Date: Re: Hamfest
Next by Date: Re: Three phase TC-Geek Group
Prev by thread: NST questions
Next by thread: Re: NST questions
Index(es):
- Date
- Thread