Re: triggered gaps in Re: Three phase TC

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Malcolm Watts by way of Terry Fritz <twftesla-at-qwest-dot-net>" <m.j.watts-at-massey.ac.nz>

Hi Marc,
         I like the way you are constantly thinking outside the 
square ;)  You've certainly given me the incentive to build a 
triggered gap when time permits (as usual :(

On 16 Jul 01, at 11:20, Tesla list wrote:

> Original poster: "Metlicka Marc by way of Terry Fritz
<twftesla-at-qwest-dot-net>" <mystuffs-at-orwell-dot-net>
> 
> i've been thinking on this idea and think that with a three phase line
> to begin with, the three triggered gaps could be used to serve the
> porpoise.
> with single phase line, it would have to be rectified anyway, but i have
> a schematic for a variable frequency three phase inverter that may do
> the trick for a three phased triggered pulse driver?
> now what if the secondary was simultaneously wound with three separate
> sized wires, each starting the first turn 2" above the next. then three
> separate primaries were installed with a 2" separation and resonating
> with there corresponding secondary winding. then each was triggered with
> one leg of the three phases, COULD three separate resonant frequencies
> be made to breakout of one topload 120 degrees apart?
> this may be an interesting experiment.
> marc m.
> geek #1055
> (PI GEEK)

I'd guess that there is a risk of flashovers between turns as there 
will be a considerable voltage difference between them at each 
increment of coil height. Please try it and let me know if I'm wrong.

Regards,
Malcolm