Re: TC question

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Jim Lux by way of Terry Fritz <twftesla-at-qwest-dot-net>" <jimlux-at-earthlink-dot-net>

Mind you, that secondary capacitor needs to hold off some 500 kV to 1 MV,
which is no trivial matter...
----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Saturday, July 28, 2001 8:54 PM
Subject: TC question


> Original poster: "Darin Willson by way of Terry Fritz
<twftesla-at-qwest-dot-net>" <darinwil-at-execpc-dot-com>
>
> I was wondering,
> since the ground and the topload act as a capcitor, could one take and
> instead of using a topload & ground
> hook the leads to another cap? like the schematic on the following link?
> http://my.voyager-dot-net/~darin.willson/tc.gif
>
>
> If you can then what would happen if you made another primary and
secondary
> that are resonant at the first
> coils Freq  and used this as your driver for the second set of coils?
>
>
>
>
>