RE: Designing for high Power Factor

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Loudner, Godfrey by way of Terry Fritz <twftesla-at-qwest-dot-net>" <gloudner-at-SINTE.EDU>

YES!---I want to see these calculations.

Godfrey Loudner

> -----Original Message-----
> From:	Tesla list [SMTP:tesla-at-pupman-dot-com]
> Sent:	Friday, June 08, 2001 8:23 PM
> To:	tesla-at-pupman-dot-com
> Subject:	Re: Designing for high Power Factor
> 
> Original poster: "Finn Hammer by way of Terry Fritz <twftesla-at-qwest-dot-net>"
> <f-hammer-at-post5.tele.dk>
> 
> 
> 
> Tesla list wrote:
> > 
> > Original poster: "R.E.Burnett by way of Terry Fritz
> <twftesla-at-qwest-dot-net>"
> <R.E.Burnett-at-newcastle.ac.uk>
> > 
> > Hi guys,
> 
> bigsnip
> 
> > 
> > If there is much interest on this list,  I will try to go through a
> > "Design Example".  Something like "What ballast and cap values would
> give
> > 10kW at 371BPS with a PF of 0.9 ?"  I think that correct design of the
> > charging circuit is very important,  however I don't want to bore the
> > socks off those who don't really care about this stuff, and get along
> just
> > fine without it !
> > 
> >                                                         Cheers,
> > 
> >                                                         -Richie,
> >                                                         (Newcastle, UK)
> 
> Dear Richie!
> 
> Nothing will be greater for a long time, after your design example. Pls.
> do it!.
> 
> Cheers, Finn Hammer
> 
>