[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Winding the primary?
Original poster: "Barton B. Anderson by way of Terry Fritz <twftesla-at-uswest-dot-net>" <tesla123-at-pacbell-dot-net>
Approximately an 1 inch (little more is ok). Just typical quick thoughts on
this.
Bart A.
Tesla list wrote:
> Original poster: "raven0075 by way of Terry Fritz <twftesla-at-uswest-dot-net>"
<raven0075-at-home-dot-com>
>
> I am looking about 13 turns 1/4 copper tub, how much space do I want to
leave
> in-between the coils, with a 4.5 Diameter primary. at 900 wraps 24awg wire.
>
>
> thanks
>
>
>
>
>