Re: Synchronize to your RSG (was Re: RATs)

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Luc by way of Terry Fritz <twftesla-at-uswest-dot-net>" <ludev-at-videotron.ca>

Hi Finn, Marco, all

On a previous coil I use a RSG and I want to know how mush break
I had per second. On the disk I have steel bolt holding the brass
electrode, on one side I put a magnet, on the other side I put a
small coil coming from a relays, I juste hook the coil to my
digital meter and it was enough to have a reading of the frequency.

Cheer,

Luc Benard

Tesla list wrote:
> 
> Original poster: "Marco Denicolai by way of Terry Fritz
<twftesla-at-uswest-dot-net>" <marco.denicolai-at-tellabs-dot-com>
> 
> Tesla list wrote:
> >
> > Original poster: "Finn Hammer by way of Terry Fritz
> <twftesla-at-uswest-dot-net>" <f-hammer-at-post5.tele.dk>
>  snip
> 
> > I think you are talking about those capacitive sensors?
> 
> There are also magnetic, inductive and photo proximity sensors. I guess
> I would go for an inductive proximity sensor: they sell for about $40 on
> the Farnell book. They are available with PNP or NPN type output, AC or
> DC feed (e.g. Honeywell).
> 
> Regards
> 
> --
> _____________________________________________________________
> 
>  Marco Denicolai           Senior Design Engineer
>  Tellabs Oy                tel: +358 9 4131 2769
>  DSL Products              mobile: +358 50 353 9468
>  Sinikalliontie 7          fax: +358 9 4131 2410
>  02630 Espoo  FINLAND      email: marco.denicolai-at-tellabs-dot-com
> _____________________________________________________________