Re: NST phasing questions

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Ed Phillips by way of Terry Fritz <twftesla-at-qwest-dot-net>" <evp-at-pacbell-dot-net>

Tesla list wrote:
> 
> Original poster: "Loudner, Godfrey by way of Terry Fritz
<twftesla-at-qwest-dot-net>" <gloudner-at-SINTE.EDU>
> 
> Hi All
> 
> You have a 15KV/60MA and 12KV/120MA . Why not place a 50,000 ohms resistor
> in series with the HV leads from the 15KV/60MA to reduce the output to
> 12KV/60MA. Then you can parallel the two NST for a 12KV/180MA supply. Make
> the resistor rated much above 720 watts to reduce losses from heating the
> resistor. As to where to get such a HV resistor, I don't know.
> 
> Godfrey Loudner


	You can connect them in parallel without ANY resistor!

Ed