Re: Need TSG help

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Malcolm Watts by way of Terry Fritz <twftesla-at-qwest-dot-net>" <m.j.watts-at-massey.ac.nz>

Hi Steve,
          I checked the circuit (thanks). I can see why the 
simultaneous firing is happening (capacitive coupling of a subtantial 
pulse to the discharge gap trigger electrode but don't have a 
solution for your particular configuration yet. You might like to try 
connecting the cold side of the charging HEI to the "cold" side of 
its own gap if that is possible given the isolation requirements of 
such a configuration. 

Regards,
malcolm


 
On 5 Sep 2001, at 8:16, Tesla list wrote:

> Original poster: "S & J Young by way of Terry Fritz <twftesla-at-qwest-dot-net>"
<youngs-at-konnections-dot-net>
> 
> Malcom & other TSGers,
> 
> The cold end of the HEIs both go to the power supply ground.  Rick Williams
> kindly put a conceptual circuit on his website which is
> http://potluck45.homestead-dot-com/files/DualTSG.jpg.   Not shown are the
> trigger electrode balancing resistors.  Thanks for your interest.
> --Steve
> ----- Original Message -----
> From: "Tesla list" <tesla-at-pupman-dot-com>
> To: <tesla-at-pupman-dot-com>
> Sent: Tuesday, September 04, 2001 8:15 AM
> Subject: Re: Need TSG help
> 
> 
> > Original poster: "Malcolm Watts by way of Terry Fritz
> <twftesla-at-qwest-dot-net>" <m.j.watts-at-massey.ac.nz>
> >
> > Hi Steve,
> >           Unless I've missed something, you haven't said where the
> > cold end of the HEIs are connected. A circuit diagram would be of
> > great assistance.
> >
> > Regards,
> > malcolm
> 
> 
> 
> 
> 
>