interesting idea from another list

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Kevin by way of Terry Fritz <twftesla-at-qwest-dot-net>" <kweaver-at-vvm-dot-com>

This came from another list I am on. I am thinking about trying this with my
coil. Does anybody know what the outcome will be?

I have an experiment for some tesla fun.
1. Take the toroid or ball off your secondary coil and
rig multiple Aluminum tubes of slightly less diameter
than the other so each one fits inside each other.
2.Buy some mylar or polyester material of woven fabric
and put the fabric in the gap area between each tube
so that your fabric insulates each tube from one
another.
3.Take your favorite liquid dielectric and fill the
gap between each tube with the liquid to separate each
aluminum tube dielectrically and saturate the fabric.
4.seal the ends of the outside tube.
5.Assemble to Secondary coil.
6.Tell us the difference in how much voltage gains you
get and if its more effient than standard toroids or
balls.
7.This same construction can also be applied to
toroids and balls but require a machine shop and
welders.
I bet you'll have more fun with a resonator tube of
the kind I just described to you especially if you get
your outside tube at around 24 inches diameter
inserting more tubes until you reach 1 inch at the
core.
Best of fun and good luck.