Re: Drying tranny oil

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Ben McMillen by way of Terry Fritz <twftesla-at-qwest-dot-net>" <spoonman534-at-yahoo-dot-com>

What exactly is Ice melt? You're not talkin about rock salt
I assume.. 

Coiling In Pittsbrugh
Ben McMIllen

--- Tesla list <tesla-at-pupman-dot-com> wrote:
> Original poster: "marc metlicka by way of Terry Fritz
> <twftesla-at-qwest-dot-net>" <mystuffs-at-orwell-dot-net>
> 
> 
> A dryer is easy, just one or two sealed buckets of ice
> melt connected to
> the drum via a hose.
> filter through coffee filters to remove the smallest of
> particles.
> Take care,
> Marc M.
> 
> 
> > >
> > > Hi all,
> > >   I recently acquired 110 gallons of transformer
> oil.. Unfortunately, when
> > > I got it I had to put it into a 55 gal drum that had
> some water in it
> > > (Bad.. I know.. but it was drain it or loose the free
> oil) Is there any
> > way
> > > to dry the oil (get the water out)? I was wondering
> if you could maybe put
> > > the drum under a vacuum.. Also, the oil had alot of
> crud (corrosion from
> > > the tanks it was in).. can this be easily filtered
> out? I don't want to
> > use
> > > the oil and then have problems with conductive stuff
> floating around
> > > inside.. ;)
> > >
> > > Coiling In Pittsburgh
> > > Ben McMillen
> > >
> > >
> > >
> > >
> 
> 
> 

__________________________________________________
Do You Yahoo!?
Yahoo! Tax Center - online filing with TurboTax
http://taxes.yahoo-dot-com/