drawing of "3 pipe gap"

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Jim Lux by way of Terry Fritz <twftesla-at-qwest-dot-net>" <jimlux-at-earthlink-dot-net>

I've finally done a drawing of my simple 3 pipe gap and posted it
http://home.earthlink-dot-net/~jimlux/hv/images/3pipe.gif

I think this is about the simplest static gap you can build that is
reasonably adjustable with just one movable part. With a small fan blowing
on it, the sparks distribute nicely over the lengths of the tubes, and it
runs very cool.

Next up.. I'm going to make it triggered..